Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKMH53H-CCSNGE02

AKMH53H-CCSNGE02

by Kollmorgen
$6,000.00 - $6,000.00
$6,000.00
$6,000.00 - $6,000.00
$6,000.00
Available, Shipping Varies
The Kollmorgen AKMH53H-CCSNGE02 is a factory-standard, synchronous servomotor, ideally utilized with the manufacturer's AKD servo drive. Constructed with 1.4404 stainless steel housing, it is compatible with food-grade couplings and optimal for sanitary operations including foodstuff cutting, filling, and packaging. The servomotor adheres to EPDM standards, comprising a specially designed O-ring. Usage protocols require cautious handling and cleaning processes; strictly with specified agents at low pressure and temperatures ranging from 40 °C to 50 °C. It is transport-sensitive and necessitates careful inspection for visible damages before operation. Despite its vulnerability during storage and assembly, following the manufacturer's guidelines guarantees unlimited storage time. It's advised to abstain from rigid coupling with external additional bearings; to prevent shaft contamination, and failure. Lastly, the stainless-steel shaft key adheres to DIN 6885 T1 Form A norms and the motor lacks a holding brake.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Name: AKMH53H-CCSNGE02
  • Product Type: Synchronous Servomotor
  • Material: 1.4404 Stainless Steel
  • Designed for Use With: AKD Servo Drive
  • Applications: Hygienic Applications, Foodstuff Cutting, Filling, and Packing
  • O-ring Design: EPDM Standards
  • Cleaning Instruction: Flush Water at 40-50 degrees Celsius from Top to Bottom with Low Pressure
  • Transportation: No Cuts on Tube, Check for Visible Damage Before Operation
  • Storage Recommendations: Must Follow Manufacturer's Instructions, Shafts and Flanges are Vulnerable during Storage and Assembly, Unlimited Storage Time if Manufacturer's Instructions Followed
  • Shaft Design: DIN 6885 T1 Form A Specifications, Stainless Steel
  • Run-in Procedure: 30 Minutes at Top Speed in Both Directions with 30 Minute Self-Cooling in Between
  • Additional Feature: Without Holding Brake
  • Coupling Restrictions: No Rigid Coupling with External Additional Bearings.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204