Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of CDB01.1C-S3-EN2-EN2-NNN-MA1-NN-S-NN-FW

CDB01.1C-S3-EN2-EN2-NNN-MA1-NN-S-NN-FW

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat's CDB01.1C-S3-EN2-EN2-NNN-MA1-NN-S-NN-FW is a CDB series control section specifically designed for use in IndraDrive drive controllers. This component, also extendable to other optional modules, is powered by a 24 Volts DC power section. It should be installed vertically by trained professionals, with dimensions sized at 322.6 x 103 x 49.5 millimeters. Heat dissipation occurs within the cabinet, utilizing an intuitive airflow system where cool air enters beneath and heated air escapes through the top. To prevent overheating and maintain efficiency, ambient temperature should remain 0 to 40 degrees Celsius and altitude stay below 1000 meters. If temperature increases over 40 degrees Celsius or altitude surpasses 1000 meters, output derates. The control section is completed with SERCOS III master, analog I/O extension, and two EnDat 2.1 interface-equipped encoder modules. A standard control panel is required for compatibility.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Series: CDB
  • Part of: IndraDrive drive controllers
  • Output of Power Section: 24 Volts DC
  • Mounting: By trained professionals only
  • Installation Orientation: Vertical
  • Dimensions: 322.6 x 103 x 49.5 millimeters
  • Heat Dissipation: Inside cabinet
  • Air Flow: Enters at bottom, exits at top
  • Working Temperature Range: 0 to 40 degrees Celsius
  • Maximum Installation Site Altitude: 1000 meters
  • Relative Humidity: Less than or equal 95%
  • Over-Temperature and Over-Altitude Restrictions: Temperature more than 55 degrees Celsius or altitude more than 4000 meters not allowed
  • Communication: Integrated SERCOS III master
  • Installed Modules: Analog I/O extension and two encoder modules with EnDat 2.1 interfaces
  • Firmware: Ordered separately
  • Compatible Control Panel: Standard control panel only, not compatible with comfort control panel.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204