Skip to content
Call:1-888-551-3082 International: 1-919-443-0207
Call:1-888-551-3082 International: 1-919-443-0207


Request a quote
The CDB01.1C-SE-ENS-EN2-NNN-NNN-S2-S-NN-FW Co control section is a quality product from Bosch Rexroth Indramat. This product is designed to be installed inside the power section of the drive controller and is equipped with Safe Motion safety technology (SIL2 / cat. 3 PL d). Its standard SERCOS interface, which uses separate pins for data transmission and reception, is sensitive to overtightening. The device lacks optional modules at its X8.1 and X8.2 connecting points, but incorporates an optional EnDat 2.1 / 1 Vpp / TTL encoder at the X4.2 point. It has terminal blocks, spring terminals and live electrical connection points, and its firmware is purchased separately. For safety, the unit should not be installed near radio equipment, operated underwater, or subjected to crushing. It has user-friendly features such as a standard control panel. Aftermarket care of this unit is backed by Servo Supplier for a year. Note: Capacitors should be discharged fully (about 30 mins) before handling.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: CDB01.1C-SE-ENS-EN2-NNN-NNN-S2-S-NN-FW
  • Operational Requirements: To be plugged inside the power section of the drive controller
  • Limitations: Limited number of plug-in actions
  • Line Code: 01
  • Connecting Points: No optional module at X8.1 and X8.2
  • Safety Technology: Safe Motion (SIL2 / cat. 3 PL d)
  • Data Transmission: SERCOS interface with separate pins
  • Connection Points: Screw terminal blocks and spring terminals
  • Materials: Free of asbestos, mercury and chlorinated hydrocarbons
  • Optional Module at X4.2: EnDat 2.1 / 1 Vpp / TTL encoder
  • Connector: D-Sub connector with 15 poles
  • Firmware Requirements: To be bought separately
  • Backup Support: One year
  • Prohibited Operational Areas: Underwater, near high-frequency and radio equipment
  • Handling Requirement: Avoid jamming and crushing
  • Discharge Time: 30 minutes for capacitors
  • Axes Count: Two
  • Connection Cable Specification: 0.5mm2 to 0.5mm2 cross-section
  • Control Panel: Standard, to be plugged in first
  • Global Shipping: Available

Get In Contact


Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204