Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of CSH01.1C-PB-EN2-NNN-NNN-S2-S-NN-FW

CSH01.1C-PB-EN2-NNN-NNN-S2-S-NN-FW

by Bosch Rexroth Indramat
$2,871.44 - $2,871.44
$2,871.44
$2,871.44 - $2,871.44
$2,871.44
Available, Shipping Varies
The CSH01.1C-PB-EN2-NNN-NNN-S2-S-NN-FW is a control section developed by Bosch Rexroth Indramat that incorporates a digital input/output in accordance with IEC 61131, Type 1 standards, and features an E-Stop factory setting. The component includes a relay contact with 1 x 106 switching actions at a maximum load time constant and up to 1000 milli Ohms contact resistance. The device integrates a PROFIBUS module adhering to EIA-RS485 standards, with a shield connection enabled by a metalized connector housing and D-Sub mounting screws. Probe input current is between 2 to 5 mA. The control section tolerates limited plugging/unplugging cycles (less than 20 times) and isn't suited for environments with acute temperature variations. Fit for use within defined parameters set by the manufacturer, the device is compliant with national EMC regulations and requires programming upon commissioning. Always use conductive packaging for storage and install using stranded wires and adhere to general safety regulations and installation guidelines. Not suitable for low-voltage residential areas.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: CSH01.1C-PB-EN2-NNN-NNN-S2-S-NN-FW
  • Feature: Digital I/O with E-Stop factory setting
  • Relay Contact: 1 x 106 switching actions at maximum time constant of load
  • Maximum Contact Resistance: 1000 milli Ohms at minimum load
  • Digital Inputs/Outputs Standards: IEC 61131, Type 1
  • Probe Inputs Current: 2mA to 5mA
  • Additional Module: PROFIBUS module with shield connection through a metalized connector housing and D-Sub mounting screws
  • Product Installation Limit: Should not be plugged or removed more than 20 times
  • Storage: Conductive packaging
  • Programming Requirement: Drive controller featuring the unit has to be programmed before it is commissioned
  • Data Transmission Standards: EIA-RS485
  • Temperature Tolerance: Cannot be used when there are extreme temperature fluctuations
  • Use Limitation: Not to be used in a low-voltage mains-supplying residential area
  • EMC Regulations Compliance: Must be operated only if the application meets the required national EMC regulations
  • Installation Guidelines: Has to be executed respecting all the general safety regulations and installation guidelines
  • Terminal Connections: Spring terminals connections using stranded wires.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204