Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of CSH01.1C-PL-ENS-EN1-MD1-NN-S-NN-FW

CSH01.1C-PL-ENS-EN1-MD1-NN-S-NN-FW

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat CSH01.1C-PL-ENS-EN1-MD1-NN-S-NN-FW is a control section that operates with a standard panel and can accommodate two multimedia card types. Its Type 2 relay contact has a 1ADC carrying capacity and a 30VDC voltage load capacity. The unit's digital inputs/outputs comply with IEC 61131, Type 1 specifications, and uses probe digital inputs for sophisticated measuring mark detection. The control section lacks safety technology and employs a RS 232 serial interface for commissioning and servicing. The product has a standard inrush current of 4mA, and is designed with an emergency stop system. Connections are preferred without solid wires, and the device does not negatively impact the environment. Usage must conform to the intended application's prerequisites, and the unit should not be operated in damaged or faulty condition. Take note that the device can sustain damage if safety instructions are disregarded and should only be handled by qualified personnel.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: CSH01.1C-PL-ENS-EN1-MD1-NN-S-NN-FW
  • Control Panel Compatibility: Standard
  • Multimedia Card Compatibility: Two Types
  • Relay Contact Type: Type 2
  • Relay Contact Current Carrying Capacity: 1ADC
  • Relay Contact Voltage Load Capacity: 30VDC
  • Digital Input/Output Standards: IEC 61131, Type 1
  • Digital Input Function: Detection of sophisticated measuring marks
  • Digital Output Feature: Separate ON and OFF output voltages
  • Safety Technology: None
  • Interface: RS 232 Serial
  • Inrush Current: 4mA
  • Connection Requirements: No solid wires for connection with spring terminals
  • Environmental Influence: None
  • Additional Components: Drive Controller
  • Installation Conditions: Not to be mounted or operated in a damaged or faulty condition
  • Usage Restrictions: Cannot be used for applications not stated by manufacturer
  • Voltage: May have high electrical voltage due to incorrect connection
  • Operating Requirement: Should be handled only by qualified personnel
  • Emergency Stop Mechanism: Yes, unit is not to be operated if it is not in proper working condition
  • Analog Inputs: Type 4, Typical resistance of 160kOhms, 8-fold oversampling
  • Identification: Type designation on type plate
  • Delivery: Worldwide through logistics team.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204