Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of DDS02.1-W100-DS04-03-FW

DDS02.1-W100-DS04-03-FW

by Bosch Rexroth Indramat
$2,321.61 - $2,321.61
$2,321.61
$2,321.61 - $2,321.61
$2,321.61
Available, Shipping Varies
The DDS02.1-W100-DS04-03-FW, a DDS series digital servo drive, is created by Bosch Rexroth Indramat for industrial use. It outputs a rated current of 100 Amps under specific ambient conditions: temperatures from 0 to 45 degrees Celsius, maximum elevation of 1000 meters and relative humidity of utmost 95%. For operation above these conditions, load factors should be adjusted appropriately. The drive, alongside its supply units, is built for installation into a control cabinet or an enclosed housing adhering to IP10 protection standards. It has dimensions of 355 x 325 x 105 millimeters and requires a minimum space of 80 millimeters for effective cooling at the top and bottom. The SERCOS fitted command and communication module and the easily removable software module allow for convenient commissioning and minimal downtime. The drive system is only intended for use by trained technical personnel.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Series: DDS
  • Model: DDS02.1-W100-DS04-03-FW
  • Product Type: Digital Servo Drive
  • Rated Current Output: 100 Amps
  • Ambient Conditions: 0 to 45 degrees Celsius, maximum 1000 meters elevation, maximum relative humidity of 95%
  • Derated Operation Conditions: Up to 55 degrees Celsius, up to 5000 meters elevation
  • Mounting: Control cabinet or closed housing that meets IP10 protection requirements
  • Mounting Direction: Vertical
  • Dimensions: 355 x 325 x 105 millimeters
  • Cooling System: Cooling air from inside the cabinet, air inlet on the bottom side, outlet on the top side
  • Command and Communication Module: SERCOS
  • Software Module: Removable, contains drive firmware and operating parameters
  • Motor Feedback: Integrated digital servo feedback
  • Operator Requirements: Qualified and trained technical personnel

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204