Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
product Main (Front Left) image of DKR03.1-W200N-BE11-01-FW

DKR03.1-W200N-BE11-01-FW

by Bosch Rexroth Indramat
$31,416.00 - $31,416.00
$31,416.00
$31,416.00 - $31,416.00
$31,416.00
In Stock, Ships Today
Bosch Rexroth Indramat's DKR03.1-W200N-BE11-01-FW is a drive controller designed for monitoring and controlling specific motors. An integral part of the DKR product group, the device bears a line code of 04 and a design code of 1. Installation mandates a control cabinet and a minimum clearance distance of 160mm for sufficient airflow cooling. It should always be operated as per its original configuration using approved components, firmware, and software. Primary applications include printing machines while environments like underwater, refinery plants, construction cranes, and food processing plants are ill-suited. It's essential only qualified personnel handle the device to prevent injuries from high discharge current, high operational voltage, and hot housing. Connective terminals rated 0 to 50 volts require protective low voltage cables, and the device should always be grounded. Precautions include avoiding touching electrical connection points when powered due to possible leakage current over 3.5mA.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Group: DKR
  • Product Code: DKR03.1-W200N-BE11-01-FW
  • Installation: Inside a control cabinet
  • Line Code: 04
  • Design Code: 1
  • Motor Operation: Monitors and controls manufacturers motors
  • Mounting Position: Specified by manufacturer
  • Clearance Distance: Minimum of 160mm from the control cabinet
  • Product Condition: Should not be mounted or operated if damaged or faulty
  • Usage: Original state, no structural changes
  • Operating Combination: Specified combination and components using the specified firmware and software
  • Accessories: Only those approved by the manufacturer
  • Applications: Printing machines
  • Operation: Not suited for underwater operations
  • Operating Risk: High discharge current and high voltage
  • Housing: Becomes very hot during operation
  • Safety: Can cause injury if handled inappropriately, should be operated by qualified personnel only
  • Restrictions: Not to be used in refinery plants, construction cranes, food processing plants and similar machinery
  • Ground Connection: Permanent ground connection is necessary
  • Electrical Safety: Electrical connection points must never be touched when power supply is on
  • Leakage Current: Over 3.5mA
  • Connection: Clamps and terminals with 0 to 50 volts rating must be connected using protective low voltage type cables.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204