FC-202P22KT6134F4112

The Danfoss FC-202P22KT6134F4112 adjustable frequency drive is a member of the renowned VLT FC 202 AQUA Drives series, designed by Danfoss for demanding industrial automation applications. This Frequency Inverter Drive operates on a nominal Input Voltage 230 V and delivers a robust Continuous kVA at 208 V of 31.7 Kva, supporting a Rated Load of 2 HP. The drive’s Number Of Phases 3-Phase architecture ensures balanced power distribution, while its Typical Shaft Output of 22 kW (equivalent to 30 HP at 240 V) provides ample torque for a wide range of motor sizes. Housed in a compact enclosure, the unit accommodates a Maximum Pre-fuses rating of 200 A to safeguard against overcurrent events. Its intelligent design seamlessly integrates into existing control panels, ensuring swift installation and reduced commissioning time.

Performance is further enhanced by precise analog control and power handling capabilities. The drive features one programmable analog output with an output range of 4–20 mA, an 8-bit resolution, and output accuracy within 0.8% of full scale. The maximum resistor load on the common analog output is 500 Ω, ensuring stable feedback for process control loops. Continuous protection and dynamic response are achieved with a Maximum Input Current (Continuous 1x200–240 V) of 172 A and a short-term surge capacity of 189.2 A (Intermittent), paired with Output Current (Continuous 3x200–240 V) of 88 A and 96.8 A intermittent output. The drive’s Automatic Switching Frequency Modulation adapts switching rates in real time to optimize motor smoothness and minimize acoustic noise under varying load conditions.

Reliability and system integration are at the core of the FC-202P22KT6134F4112 design. Control terminals accept multiple conductor types—1.5 mm² (16 AWG) rigid wire, 1.0 mm² (18 AWG) flexible cable, and 0.5 mm² (20 AWG) enclosed core cable—facilitating seamless connections in complex cabinets. Grounding compliance is assured via the dedicated T95 (PE) connection, requiring a minimum 10 mm² cross-section or two rated line power conductors per EN 50178. Non-shielded cable grounding simplifies installation while meeting industrial safety standards. The drive’s modular IO options and enhanced thermal management ensure stable operation across a wide temperature range, making it ideal for pumps, fans, conveyors, and other critical automation systems where reliability and precise speed control are paramount.