Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
manufacturer image of FECG02.1-2K20-3P400-A-SP-MODB-01V01

FECG02.1-2K20-3P400-A-SP-MODB-01V01

by Bosch Rexroth Indramat
$2,483.35 - $2,483.35
$2,483.35
$2,483.35 - $2,483.35
$2,483.35
Available, Shipping Varies
Produced by Bosch Rexroth Indramat, the FECG02.1-2K20-3P400-A-SP-MODB-01V01 is a frequency converter that uses a standard firmware version V-type. It uses magnetic flux PWM modulation, can withstand harsh environments, and operates within a frequency range of 0Hz-599Hz. Designed for U/f operation, the device measures 125 x 220 x 176 mm and can be securely mounted using M5 screws (4Nm torque). Accessible by removing two front screws, the device has an IP 20 degree protection. Its digital frequency output and multi-function analog outputs enhance its versatility. Cabling must be secure and fuses should be installed between the three-phase input power and main terminals to prevent damage. Failure may occur if fitted with a power capacitor, radio noise filter or a surge suppressor. With a non-groundable common terminal, this frequency converter is designed to be used with a servo drive and motor from the same manufacturer.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: FECG02.1-2K20-3P400-A-SP-MODB-01V01
  • Line Code: 02
  • Firmware: V-type standard
  • Modulation Technology: magnetic flux PWM
  • Operating Mode: U/f
  • Phases: Three
  • Output Frequency Range: 0Hz to 599Hz
  • Braking Mechanism: External braking resistance
  • Controller: PID
  • Communication System: ModBus
  • Size: 125 x 220 x 176 mm (B x H x T)
  • Fastening Method: M5 screws with 4Nm tightening torque
  • Open Mechanism: By removing two screws in front, panel, front cover
  • Drive System Components: Servo drive, a motor from the same manufacturer
  • Degree of Protection: IP 20
  • Output Type: Digital frequency and multi-function analog outputs
  • Installation Requirement: Fit a fuse between the three-phase input power supply and the two main circuit terminals L1 and L2
  • Placement Requirement: Between an AC output choke and an AC filter
  • Common Terminals: Two, must not be grounded
  • Wiring Requirement: Cables must be tightened
  • Output Attachments: U, V and W outputs are connected to the motor.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204