Skip to content
Call:1-888-551-3082 International: 1-919-443-0207
Call:1-888-551-3082 International: 1-919-443-0207


Original price $3,000.00 - Original price $3,000.00
Original price
$3,000.00 - $3,000.00
Current price $3,000.00
Available, Shipping Varies
Request a quote
The HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW is a drive controller made by Bosch Rexroth Indramat, offering no safety technology. Its digital input/output connections are located at the X37 spring terminal connector, and the device doesn't release hazardous substances when used appropriately. The voltage should be reduced to under 50V when undergoing maintenance or repair. Notably, it features a 24-bit resolution analog output and overload protection. It includes a PROFIBUS interface with a signal voltage of +5V +/-10%, and single and three-phase operation compatibility. The controller has functionality to measure and monitor motor holding brake currents and high-side switches for digital inputs. It is essential to read the safety instructions to avoid mishaps and not operate the device in its faulty state. Interference suppression measures are needed for residential area use. Always disconnect the connectors when the power supply is switched off. The controller supports signal scalable processing and buffering of encoder-related data via manufacturer's cables or a battery box.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Name: HCS01.1E-W0003-A-02-B-ET-EC-PB-NN-NN-FW drive controller
  • Safety Technology: None
  • Connection: X37 spring terminal connector
  • Hazardous Substances Release: None with appropriate use
  • Voltage Limitation: 50V
  • Control Panel Connection: Required when turned ON
  • Analog Output Resolution: 24 bits
  • Overload Protection: Present for analog current input
  • PROFIBUS Interface: Present with a signal voltage rating of +5V +/-10%
  • Integration: Multi-Ethernet module with two unicolor port LEDs and a multicolor diagnostic LED
  • Encoder Support: Supports all standard encoders
  • Signal Processing: Scalable
  • Buffering Capability: Encoder-related data using manufacturer’s encoder cables or a battery box
  • Digital Inputs: High-side switches
  • Inbuilt Functionality: Measuring and monitoring the current of the motor holding brake
  • Engineering Port: Present on the front panel
  • Operations: Supports both single-phase and three-phase
  • Safety Instructions: Required for operation
  • Installation: Not allowed in a faulty state
  • Operation: Permitted only with intended firmware
  • Interference: Potential when used in residential areas without interference suppression measures
  • Pressurized Lines: Risk of injury with improper handling
  • Power Supply: No connection or disconnection allowed when ON
  • Housing Voltage: High with unintended use
  • Leakage Current: High with unintended use
  • Shipping: Possible via freight carriers with a worldwide presence.

Get In Contact


Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204