Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW

HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW

by Bosch Rexroth Indramat
Request a quote
The HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW drive controller, made by Bosch Rexroth Indramat, is designed to control third-party motors. It retains a heated surface during and post operation, necessitating all covers and guards to be securely fastened prior to activation. With a 3.5mA leakage current, the controller incorporates an outer conductor of less than 8AWG and offers a monitoring function for malfunction prevention. It requires a minimum cool-down phase of 15 minutes post deactivation and controls the motor's holding brake. Installation, operation and safety guidelines must be adhered to, and the controller is not waterproof. The product cannot be connected to public, low voltage residential power supplies, and additional sensors and actuators may be required for control. Proper mounting, transportation, and storage are essential, and the device supports a maximum operating temperature of 55°C. The controller does not operate when de-energized and is deliverable globally.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Name: HCS01.1E-W0005-A-03-B-ET-EC-NN-S4-NN-FW Drive Controller
  • Compatibility: Compatible with third party motor
  • Surface Temperature: Hot during and soon after operation
  • Leakage Current: More than 3.5mA
  • Outer Conductor Cross-Section: Less than 8AWG
  • Cool Down Time: At least 15 minutes
  • Function: Controls the holding brake of the motor
  • Maximum Operating Temperature: 55°C
  • Safety Instructions: Required before use
  • Underwater Operation: Not supported
  • Usage: Not for use in low voltage public mains supplying the residential area
  • Components: Part of a drive system along with the motor, supply unit and encoder
  • Additional Requirements: May require additional sensors and actuators for controlling and monitoring
  • Mounting: Requires proper and correct mounting, installation, transportation and storage
  • Safety Measures: Operation restricted without grounding conductor connection, commissioning cannot be done if emergency stop switch is not working
  • Power Isolation: Safe starting lockout required to avoid unintentional startup
  • Surface Temperature: More than 60°C soon after or during operation
  • Power Connection: Cannot be disconnected in de-energized state
  • Mains Voltage: 3 x 230VAC to 500VAC
  • Shipping: Worldwide

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204