Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of HCS01.1E-W0009-A-02-B-ET-EC-EM-NN-NN-FW

HCS01.1E-W0009-A-02-B-ET-EC-EM-NN-NN-FW

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-B-ET-EC-EM-NN-NN-FW drive controller is a key component in various automated systems like assembly, handling, palletizing or logistics. Engineered to work seamlessly with motors and encoders from the same manufacturer, this controller not only houses power and basic control sections but also incorporates signal scalable processing. Its design features include type B digital probe inputs and a multi-Ethernet interface adhering to IEEE 802.3 standards with four status LEDs. Whilst the device's outer surface may get notably hot during operation, it is not compatible with a DC bus and does not comprise safety technology. The controller, meant for both single-axis and multi-axis drive and control tasks, operates optimally when installed in the specified position and respecting safety instructions. Despite the 3.5mA leakage current, the device benefits from a feeding-type power supply and is capable of buffering MSM encoder data with a battery box.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Model: HCS01.1E-W0009-A-02-B-ET-EC-EM-NN-NN-FW
  • Use: Automated assembly and handling, pick and place, palletizing and logistics systems
  • Series Code: 01
  • Features: Signal scalable processing, MSM encoder data buffers with a battery box, Type B digital inputs, Incorporates a power section and a basic control section
  • Mounting: Control cabinet with IP 54 degree of protection
  • Interfaces: Multi-Ethernet interface with two yellow LEDs and two green LEDs
  • Operating Temperature: Surface becomes very hot during and immediately after operation
  • Compatibility: Works with third-party manufacturer that satisfies voltage loads
  • Ethernet Interface Standard: Complies with IEEE 802.3
  • Supports: 5V TTL square-wave encoder with a reference track
  • Usage Restriction: Cannot connect to DC bus
  • Function: Controls and monitors operation of associated motor
  • Safety Technology: None
  • Power Supply Type: Feeding-type
  • Leakage Current: Over 3.5mA
  • Requirement: Must understand appropriate use and safety instructions
  • Designed For: Single-axis and multi-axis drive and control tasks
  • Installation: Only in specified position
  • Usage Recommendation: Not for use in residential areas with public low-voltage mains supply
  • Tampering Consequence: Causes untoward consequences if tampered with
  • Delivery: Can be transported to any address

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204