Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

HCS01.1E-W0028-A-03-B-ET-EC-NN-L4-NN-FW

Original price $3,772.84 - Original price $3,772.84
Original price
$3,772.84
$3,772.84 - $3,772.84
Current price $3,772.84
Available, Shipping Varies
The Bosch Rexroth Indramat HCS01.1E-W0028-A-03-B-ET-EC-NN-L4-NN-FW drive controller is specifically designed for use in compact machines and wood machining line tools. Equipped with a basic control section, the controller also encompasses performance-dependent fan control and an engineering port. It operates on a three-phase network and provides freely configurable digital inputs and outputs. Suited for synchronous motors (linear, torque or spindle type), the controller also comes with a control panel. Additional sensors may be required for optimal functioning. It is vital to be aware of potential risks from inappropriate use and dangerous movements due to incorrect parameter input. The device's use also necessitates adherence to national regulations and safety standards. Only skilled personnel should operate and repair the controller, and caution must be taken with its surface temperature, which may reach over 60°C during operation.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Model: HCS01.1E-W0028-A-03-B-ET-EC-NN-L4-NN-FW
  • Type: Drive Controller
  • Purpose: Compact machines, machine tools for wood machining line applications
  • Feature: Performance-dependent fan control
  • Extra feature: Engineering port
  • Network requirement: Three-phase network
  • Input/output: Digital inputs and outputs that are freely configurable
  • Encoder support: Supports a wide range of encoder systems
  • Control: Control panel attached
  • Motor compatibility: Operates with a linear, torque or spindle-type synchronous motor
  • Usage caution: Possibility of causing property damage with inappropriate utilization
  • Additional requirements: Might need additional sensors and actuators for control and monitoring
  • Suitability: Single-axis drive and control-related tasks
  • Temperature tolerance: Cannot operate under extreme temperature fluctuation
  • Interference suppression: Might incorporate measures to suppress additional interference
  • Installation: Requires reading and understanding of related documentation
  • Commissioning: Requires machine compliance with national regulations, safety standards
  • Operator requirement: Skilled personnel
  • Connection requirement: Cannot operate without an equipment grounding conductor connection
  • Risk: Dangerous movement if wrong motor parameters input
  • Exposure limitation: Cannot operate in proximity to high-frequency equipment
  • Safety: Securing of vertical axes against falling after motor turn off
  • Temperature of operation: Reaches over 60°C during and after operation
  • Potential injury: May cause injury due to shearing, hitting or crushing.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204