Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

HDC01.1-A040N-PB01-01-FW

Original price $3,063.16 - Original price $3,063.16
Original price
$3,063.16
$3,063.16 - $3,063.16
Current price $3,063.16
Available, Shipping Varies
The Bosch Rexroth Indramat HDC01.1-A040N-PB01-01-FW is a drive controller that should be cleaned only when switched OFF, avoiding the use of aggressive cleaners or sharp tools. It's crucial that any software or firmware module replacements occur without power supply to the controller. The controller, which heats up during operation, has an automatic activation of parameters after the cooling fan is remounted and the device is turned ON. This product carries a 40A current rating, requires a cooling air guide and should always be connected according to machine terminal diagram specifications. Its mains input voltage rating is 3 x 200 to 480VAC with +/-10% tolerance. Additionally, it features a PROFIBUS-DP interface with four diagnostic indicators and a version code of 01. The HDC01.1-A040N-PB01-01-FW can control and monitor different types of AC motors and should only be connected with the manufacturer’s parts and accessories.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Line: HDC
  • Version: 01.1
  • Current Rating: 40A
  • Voltage Rating: 3 x 200 to 480VAC
  • Tolerance Level: +/-10%
  • Noise Emission Class: Class A Group 2
  • Interface: PROFIBUS-DP
  • Interface Version: 01
  • Connector Type: 9-pin female X30 D-sub
  • Signal Type: EIA-RS-485 standards
  • Motor Compatibility: AC motors by same manufacturer
  • Accessory Compatibility: Only with manufacturer’s parts

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204