HDS03.2-W100N-HA42-01-FW
The HDS03.2-W100N-HA42-01-FW is a drive controller produced by Bosch Rexroth Indramat and assigned to the HDS Drive Controllers series. Within an Indramat multi-axis system, it regulates torque, speed, and position for connected servo modules. It provides the command and power stage required for industrial automation tasks such as packaging lines and material-handling gantries. The controller serves as the link between higher-level motion commands and the motor section, so axis response remains controlled during changing loads and speeds. This operating role suits machines that need repeatable motion across several coordinated axes.
This model exchanges set points through an analog command interface, allowing straightforward voltage or current reference signals from PLC hardware. It belongs to the DIAX04 controller family, so it can operate in coordinated motion systems with compatible DDS or MKD axes. Thermal management is handled by a built-in air blower; the fan draws cabinet air across the heat sink and eliminates the need for external ducting. For output capacity, the unit can supply up to 100 A of continuous current to a single motor power section, making it suitable for medium-to-high inertia loads that require large acceleration currents. Because the command path is analog, the controller can be integrated with simple external reference sources without adding a separate serial command interface.
The unit is identified as Line 03 and Revision 2. It integrates into a multi-axis rack with common wiring and shared diagnostic routines across installed modules. A standardized pinout maintains compatibility with existing interface cables, and the blower airflow follows the required cabinet clearance guidelines. The rack-based format also helps keep module spacing and connector access predictable inside enclosed control panels.
