HDS04.1-W200N-HT02-01-FW
The HDS04.1-W200N-HT02-01-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HDS Drive Controllers series. In a multi-axis motion system, it receives digital setpoints from the control, regulates motor power, and returns operating status to the machine controller. This supports coordinated positioning and speed control in machine tools, packaging equipment, and material-handling systems where multiple axes must respond together. By converting command values into regulated three-phase output while monitoring feedback, the module forms the control link between higher-level automation hardware and connected servo or spindle motors.
Motion commands and diagnostic data are exchanged over the SERCOS optical ring, which supports time-synchronous communication between the drive and a central master. The output stage is rated for 200 A of continuous current, allowing the unit to operate demanding motor loads while maintaining stable current delivery. Internal temperature is managed by a built-in air blower, so cooling is handled inside the housing without an external heat sink or liquid circuit. The controller belongs to the DIAX04 platform, and the Line 04 designation identifies its design line within that system. This layout keeps its electrical interface and mounting pattern consistent with related supply and interface modules installed in the same rack.
The unit is supplied as Version 1 and is classified as an HDS Drive Controller. Its connector arrangement and parameter structure support use in established drive assemblies where synchronized axes depend on predictable current, speed, and status exchange. During operation, the module closes the loop with incoming feedback so commanded motion can be corrected as load conditions change. The controller serves as the power stage for servo and spindle applications that require accurate response during acceleration, deceleration, and steady-state running.
