HDS05.2-W300N-HA42-01-FW
The HDS05.2-W300N-HA42-01-FW is a drive controller built by Bosch Rexroth Indramat and assigned to the HDS Drive Controllers series. The module operates as a central component in multi-axis systems, where it governs current and velocity loops for synchronous and asynchronous motors. By processing external reference signals and managing its power stage, the unit delivers regulated three-phase output to machine axes. This arrangement supports coordinated positioning and spindle speed control in automated production cells, especially where several motion channels must operate together from a shared drive platform. It is intended for applications where the drive must regulate motor behavior continuously rather than switching output in open loop.
Its command channel is analog, so speed or torque references arrive as ±10 V signals that the controller converts into internal setpoints. Because the reference input is voltage-based, commanded operating values can be passed directly into the control section for closed-loop response. The power bridge is rated for 300 A, allowing the device to drive large-frame motors without external current boosters. As part of the DIAX04 platform, its parameter structure, encoder feedback wiring, and emergency-stop logic match adjacent axes in the same cabinet. Thermal management relies on a built-in air blower, which pulls cooling air through the heat sink without requiring an external fan tray. The power electronics use line 05, which is sized for high-current, low-voltage spindle and feed drives.
The controller is Version 2. It uses the same mounting pitch, DC bus connectors, and front-panel diagnostics used throughout the product family. Shared connector placement helps keep bus and motor wiring organized across neighboring modules. This helps preserve consistent module spacing along the backplate in multi-axis cabinets.
