Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of HDS05.2-W300N-HT20-01-FW

HDS05.2-W300N-HT20-01-FW

by Bosch Rexroth Indramat
Request a quote
The HDS05.2-W300N-HT20-01-FW is a line 5 version 2 drive controller produced by Bosch Rexroth Indramat, suitable for the DIAX04 chassis, functioning through a SERCOS command communication interface. As per Rexroth's policy, firmware should be bought separately in order to match specific features required by customers. This model is convection cooled, featuring an internal blower, with a recommended minimum space of 90mm in front, 80mm on top, and 100mm at the bottom for increased airflow. Weighing at 25kgs with dimensions of 498x256x200mm, the enclosure holds an IP 10 rating. It has a nominal and peak current rating of 300 Amps, variable continuous current ratings dependent on the clock frequency of the power section, and a power loss of about 1200 Watts under certain operations. Its advanced signal processors require 55 watts of power from a 26 Volts DC source. People with metal implants or pacemakers should avoid close proximity to ensure safety.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: HDS05.2-W300N-HT20-01-FW
  • Product Family: Indramat HDS drive controller
  • Line: 5
  • Version: 2
  • Installation Chassis: DIAX04
  • Command Communication Interface: SERCOS
  • Cooling System: Convection cooled with internal blower
  • Recommended Space in Front: 90 millimeters
  • Recommended Space Above: 80 millimeters
  • Recommended Space Below: 100 millimeters
  • Weight: 25 kilograms
  • Dimension: 498 x 256 x 200 millimeters
  • Enclosure Rating: IP 10
  • Nominal Current Rating: 300 Amps
  • Peak Current Rating: 300 Amps
  • Continuous Current Rating at 8 kHz: 100 Amps
  • Continuous Current Rating at 4 kHz: 175 Amps
  • Power Loss at Continuous Current: 1200 Watts
  • Power Requirement for Signal Processor: 55 Watts from a 26 Volts DC source
  • Function ID Code: 20
  • Function ID Version: 01
  • Safety Precaution: Prevent persons with metal implants or pacemakers from proximity to an operating HDS series controller.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204