Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of KCU02.2N-ET-ET-025-NN-N-NN-NW

KCU02.2N-ET-ET-025-NN-N-NN-NW

by Bosch Rexroth Indramat
$2,921.97 - $2,921.97
$2,921.97
$2,921.97 - $2,921.97
$2,921.97
In Stock, Ships 3 - 5 Days
The KCU02.2N-ET-ET-025-NN-N-NN-NW is a highly reliable drive connection box crafted by Bosch Rexroth Indramat. The device forms an essential component of the IndraDrive Mi control system and is a key part within a selection of Bosch Rexroth's KCU series. Its operation is dependent on installation in control cabinets with a protection rating of IP 54 or above. Recognized by both UL and CSA, the box is designed to power the KSM and KMS series through a DC bus connection to a HMV supply unit and accommodates the RKH hybrid cable at several connecting points. It features two multi-Ethernet interfaces and is compatible with select HCS 02 supply units. The device has a 352mm length, requires a 24V supply and has an insulation resistance above 50 Mohms at 500 VDC. Remember, it must be installed with adequate clearance and should always be operated with a touch guard installed.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Line: KCU series
  • Product type: Drive connection box
  • Usage: Integral part of the IndraDrive Mi control system
  • Installation: In a control cabinet with an IP 54 or higher protection rating
  • Certification: UL Listed and CSA Certified
  • Environmental Conditions: No icing or moisture condensation on its surface
  • Mounting Position: Must be operated only in the allowed mounting position
  • Power Supply: Supplies the KSM and KMS series with power from the DC bus connection to a HMV supply unit
  • Installation Clearance: Sufficient clearance above and below it inside the control cabinet
  • Grounding System: Equipment grounding conductor
  • Cable Support: RKH hybrid cable at the X29.1 or X29.2, X52, X53, and X54 connecting points
  • Interfaces: Two multi-Ethernet interfaces for input and output
  • Compatibility: Compatible with few HCS 02 supply units from the manufacturer
  • Installation Position: Next to a supply unit in a drive system
  • Power Requirement: 24 V supply
  • Inrush Current: Not affected by the holding brake of the KSM motor
  • E-stop Function: Incorporates the wiring for the E-stop function
  • Insulation Resistance: More than 50 Mohms at 500 VDC
  • Physical Dimensions: Overall length of 352 mm
  • Safety Measures: Should not be operated without mounting the touch guard.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204