MAC041A-0-FS-4-E/050-B-0/WI652LV
The MAC041A-0-FS-4-E/050-B-0/WI652LV servo motor from Bosch Rexroth Indramat is part of the renowned MAC AC Servo Motors series, engineered for high-performance industrial automation tasks. This compact unit measures 80 x 398 x 200 mm and operates with a continuous current of 80 A while generating a power loss of 25 W under nominal load. Constructed with a permanent magnet rotor design, it achieves a nominal speed of 6000 RPM and low rotor inertia for rapid dynamic response. The motor weighs only 6 kg, offering an excellent power-to-weight ratio that simplifies installation in space-constrained systems. It meets stringent EMC requirements with an EMC level of Class A and features a robust cross-section conductor of 25 mm² for reliable power transmission.
Performance characteristics of the MAC041A-0-FS-4-E/050-B-0/WI652LV are optimized for fast acceleration and deceleration cycles, delivering a peak torque of 2.5 Nm and a rated torque of 0.64 Nm when paired with a TDM4.-020.300-W0 drive controller. The acceleration time from standstill to peak speed is 22 milliseconds and deceleration back to zero requires only 17 milliseconds, supporting high-cycle applications with rapid start-stop demands. Electrical specifications include an input voltage range of 110-240 V AC, a system frequency of 50/60 Hz, and a power consumption of 420 W under rated conditions. Insulation integrity is maintained with an insulation resistance >100 Ω, while the standard protection class IP22 safeguards internal windings from accidental contact and dust ingress. The rotor’s moment of inertia is 0.7 kg·cm², contributing to precise positioning and reduced mechanical wear in continuous operation.
Reliability is further ensured by an IP65-rated housing that protects the motor against water jets and contaminants, combined with maintenance-free electronic commutation and integrated temperature monitoring. Flange mounting allows installation in any orientation, and the motor withstands ambient temperatures from 0 to 45 °C at site elevations up to 1000 meters above sea level. During storage, the unit must be kept within -20 to 85 °C and shielded from moisture, dust, and severe shock to preserve performance. Bosch Rexroth’s range of preconfigured cables and standard flange interfaces enables seamless integration into machine tools, handling systems, transfer facilities, and textile equipment. The MAC041A-0-FS-4-E/050-B-0/WI652LV delivers smooth, precise motion control, making it an ideal choice for demanding industrial automation applications where reliability and compact design are paramount.
