MDD025A-N-100-N2G-040PB0
The MDD025A-N-100-N2G-040PB0 synchronous servomotor is produced by Bosch Rexroth Indramat for use in the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary motion for light-duty axes in packaging machinery, pick-and-place stations, and other precision assemblies. Its compact frame supports high-speed positioning while remaining compatible with established feedback and cabling arrangements. This layout is well suited to machines that need repeatable motion in a limited installation space.
At a nominal speed of 10000 rpm, the rotor can complete rapid cycles suited to short-stroke tasks. The continuous torque at standstill is rated at 0.33 Nm, which indicates the static load the motor can hold without overheating while stopped. Position reporting is handled through resolver feedback, which gives stable rotor-position signals in electrically noisy environments. Power and signal leads exit on side B of the housing, and the termination style uses a pluggable connector for straightforward cable attachment. Mechanical alignment to the driven machine is guided by a centering diameter of 40 mm, which helps keep the motor properly seated in a matching flange.
The output shaft uses a keyway so torque can be transferred to pulleys or couplings with secure engagement. A factory-installed shaft seal helps keep dust away from the front bearing area and reduces the chance of contamination entering the housing. Because the motor is supplied without a blocking brake, a vertical axis must rely on drive torque or an external holding device during shutdown. Standard balancing helps maintain smooth rotation at high speed, while the normal housing and A length keep the motor compact. A single-ended shaft on the drive side simplifies integration where only one mechanical interface is needed.
