MDD025C-N-100-N2G-040FC0
The MDD025C-N-100-N2G-040FC0 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a compact motor for digital drive controllers that delivers high-speed rotary motion to indexing tables, pick-and-place heads, and other positioning axes in automated equipment. Its C-length frame and size 025 give the stator a reduced footprint, making it suitable for densely packed multi-axis assemblies where installation space is limited. This layout fits machines that need accurate motion without using a large motor envelope.
The motor develops a continuous standstill torque of 0.90 Nm, allowing stable holding force during closed-loop servo regulation. Its rated mechanical output speed reaches 10000 rpm, which supports rapid cycle times when it is paired with high-frequency inverters. All power and feedback conductors exit on side A, which can simplify cable routing when the drive electronics are mounted on the same side of the machine. Precise mechanical alignment is aided by a centering diameter of 40 mm. Position and velocity information are returned through resolver feedback, which maintains reliable feedback over the full speed range even under electrical noise or temperature drift.
An integrated connecting cable with a coupling unit mates directly with the cabinet harness, which reduces separate connector handling during installation. The output shaft is a plain shaft without a keyway, so torque is transferred through clamp or friction hubs. The front bearing section is built without a shaft seal, so the motor should be mounted in clean areas or used with external sealing arrangements. Because no electromagnetic brake is installed, applications that need power-off holding torque must use external locking devices. The motor uses standard balancing for normal vibration control during operation.
