MDD025C-N-100-N2G-040GR1
The MDD025C-N-100-N2G-040GR1 is a compact synchronous servo unit manufactured by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Designed to work with digital drive controllers, this motor converts commanded current into rapid, repeatable rotation for gantries, small actuators, and other precision stations. Its high base speed and integrated brake support fast positioning and secure holding when motion stops. That combination suits automated assembly equipment where the drive must manage both dynamic moves and controlled standstill behavior.
The motor uses a centering diameter of 40 mm, so it seats accurately against machine surfaces and helps preserve alignment during installation. During continuous stall conditions, it supplies 0.90 Nm of torque, enabling stable force at zero speed without overheating. The rotor reaches a nominal speed of 10000 rpm, giving a wide operating range for high-cycle mechanisms. Position feedback is provided through resolver feedback, which remains reliable during rapid reversals and changing speeds. Power and signal conductors connect through a sealed connector, keeping the housing compact and reducing exposed termination points. The C length code together with the 025 frame size gives the motor a short overall package for tight mounting spaces.
Service connections exit on the right side, so cable routing can stay clear of adjacent hardware in compact machine layouts. A blocking brake rated at 1.0 Nm locks the rotor when the drive is disabled, adding holding capability during stopped conditions. The output uses a plain shaft with a shaft seal, which supports simple coupling while helping keep contaminants away from internal components. The standard housing and the absence of a side-B shaft extension keep the package straightforward for general industrial use.
