MDD025C-N-100-N2G-040PE1
The MDD025C-N-100-N2G-040PE1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it is installed in automated machinery where precise rotational speed and position are commanded by an electronic drive. The unit converts electrical power into mechanical shaft motion so that conveyors, pick-and-place axes, and small spindle modules can be coordinated with other axes in a multi-axis system. In closed-loop operation, the motor works with the drive to keep speed changes and position corrections aligned with the machine sequence.
A nominal speed of 10000 rpm supports short cycle times, and a continuous standstill torque of 0.90 Nm indicates the steady torque available for static positioning or low-speed operation. When motion must be held after power removal, the built-in blocking brake provides 1.0 Nm of holding torque. Position feedback is generated by resolver feedback, giving the drive rotor angle information that remains reliable under electrical noise and temperature changes. Power and signal conductors leave the housing through a connecting cable with a coupling unit, which supports orderly cable routing and allows the motor to be disconnected without opening the housing.
Mechanical integration uses a centering diameter of 40 mm and frame size 025 with length code C for compact machine layouts. The fixed connectors face left, which can help when cable paths approach the motor from one side of the machine. Standard balancing supports smooth rotation, and the single-ended shaft arrangement keeps the mechanical interface straightforward. The output shaft uses a keyway drive element on side A, and the shaft is fitted with a shaft seal to help limit contaminant entry near the bearing area. The housing is standard, and the available shaft end does not include a second extension on side B.
