MDD025C-N-100-N2G-040PL1
The MDD025C-N-100-N2G-040PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for pairing with digital drive controllers, this compact unit converts electrical input into high-speed rotary motion for pick-and-place modules, small gantries, or spindle positioning tasks in automated cells. Its compact format suits installations where axis space is limited and responsive motion is required. The motor is intended for closed-loop operation in machines that need accurate speed and position control without a large mechanical envelope.
At stall, the rotor can deliver a continuous torque of 0.90 Nm, which is enough to hold lightweight fixtures without thermal overload. A rated speed of 10000 rpm supports rapid indexing when short cycle times are important. Mounting alignment is guided by a centering diameter of 40 mm, while standard dynamic balancing helps reduce vibration transferred to nearby machine parts. The motor reports rotor position through resolver feedback, giving the controller rotor-angle information for closed-loop operation. Power and feedback connections use a left-side cable outlet with a single industrial connector, and a factory-installed shaft seal helps keep oil or coolant out of the bearing cavity. The shaft end has no side B extension, which reduces overhang mass.
A spring-applied holding brake supplies 1.0 Nm of static torque so vertical axes remain locked during emergency stops. The motor uses frame size 025 with length code C to keep inertia low for quick acceleration in compact motion systems. The output journal has a keyway so pulleys or couplings can be secured under dynamic load. The keyed shaft arrangement supports positive torque transmission during repeated starts, stops, and direction changes.
