MDD025C-N-100-N2K-040ML0
The MDD025C-N-100-N2K-040ML0 is a compact AC servomotor from the MDD Synchronous Motors series by Bosch Rexroth Indramat. It is intended for use with digital drive controllers, where it converts regulated inverter current into precise mechanical rotation for positioning axes and high-speed spindle duties. Its small frame supports installation in pick-and-place heads, light conveyor systems, and other compact automation equipment that benefits from repeatable motion and low rotor inertia. The motor is suited to applications where quick response and accurate control are required in a limited mounting space.
At stall, the motor delivers 0.90 Nm of continuous torque, which gives lightly loaded axes stable holding force without external gearing. Under rated excitation, it reaches a nominal speed of 10,000 rpm, allowing rapid cycle times on short-travel linear stages and other fast-moving mechanisms. A 40 mm centering pilot helps align the motor concentrically with gearboxes or mounting flanges during installation. Power and feedback leads use a left-side cable exit, which can help keep cable routing compact in dense multi-axis layouts. The motor also uses a single connector so that power and feedback circuits are combined in one keyed connection.
The feedback system combines integrated absolute encoder electronics with resolver feedback, giving the controller position information and high-resolution velocity signals in the same motor package. Standard balancing and a standard housing help keep vibration low when the motor is installed in compact machinery. The unit is supplied without a blocking brake, so any holding force at standstill must come from the drive or an external mechanical device. The output shaft uses a keyway and a standard single-sided shaft end, while the absence of a shaft seal helps reduce drag during high-speed operation. The 025 frame size keeps the motor compact and supports fast dynamic movement.
