MDD025C-N-100-N2K-040PE1
The MDD025C-N-100-N2K-040PE1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers and generates rotary motion in compact automation axes where high speed and accurate positioning are required. When paired with a compatible power module, the motor provides repeatable torque for packaging machinery, small pick-and-place heads, and other light-duty motion tasks in industrial automation. Its compact format suits installations where fast response and limited mounting space are both important.
This motor reaches a nominal rotational velocity of 10000 rpm, enabling fast cycle rates in applications that demand quick moves between setpoints. At standstill, it can deliver a continuous torque of 0.90 Nm, which is the sustained load available without exceeding thermal limits. For short-term holding or emergency stops, a blocking brake delivers up to 1.0 Nm of torque so vertical axes can remain fixed when power is removed. Mechanical alignment to gearboxes or fixtures is aided by a centering diameter of 40 mm, while wiring is simplified because the power and feedback connectors are located on the left side of the housing. A connecting cable with a coupling unit mates directly to these ports.
An integrated absolute encoder supplies single-turn position data to the controller, and complementary resolver feedback supports stable velocity regulation during changing load conditions. The output shaft uses a keyway profile to transfer torque without slip, and it is built with a shaft seal to help limit oil or coolant ingress along the shaft journal. Standard balancing supports smooth operation in typical automation duty. The C-length stator keeps the motor compact, and the single-ended shaft layout fits small servo assemblies with limited routing space.
