MDD041B-N-100-N2K-050PA0
Bosch Rexroth Indramat's MDD041B-N-100-N2K-050PA0 belongs to the MDD Synchronous Motors series and serves as a compact servo motor for digital drive controllers in automated machinery. The motor converts commanded current into controlled rotary motion so axes on pick-and-place stations, small gantries, or metering pumps can track position and speed accurately in closed-loop systems. Its compact format suits machine layouts that need responsive motion without using a large motor body.
The motor has a nominal speed of 10000 rpm, allowing high cycle rates where rapid indexing is required. At standstill, it delivers 1.35 Nm of continuous torque, which supports fine-position tasks without excessive heating during continuous operation. A 50 mm centering diameter helps align the housing with gearboxes or adapter plates during mounting. Position data is provided through resolver feedback, allowing the controller to monitor rotor angle during acceleration and in electrically noisy environments. This combination of speed, torque, mounting accuracy, and feedback supports precise motion on compact servo axes.
Power and signal cabling exit on Side A, which can simplify routing where space is limited near the motor body. A built-in integrated absolute encoder retains position information after shutdown, reducing the need for a reference move when the axis is powered again. A shaft seal helps limit contamination at the shaft opening, and the shaft uses a single keyway for positive torque transmission to the coupled load. Because the motor is supplied without a blocking brake, any holding force during a power-off condition must come from the drive or from an external mechanical device. These features support reliable integration on axes that require accurate feedback, straightforward coupling, and protected shaft entry points.
