MDD041C-N-100-N2G-050FB0
The MDD041C-N-100-N2G-050FB0 is a servo motor engineered by Bosch Rexroth Indramat for use with digital drive controllers and belongs to the MDD Synchronous Motors series. As a compact motor for tightly integrated automation axes, it converts drive current into precise rotary motion needed for positioning tasks on pick-and-place machines, packaging equipment, and electronic assembly lines. That operating role suits machinery that requires smooth acceleration, repeatable positioning, and stable motion control during frequent duty cycles. Its compact layout also fits machine sections where installation space is limited.
Its continuous torque at standstill reaches 2.05 Nm, enabling the shaft to hold load without movement during closed-loop regulation. A rated speed of 10000 rpm supports high peripheral velocity for fast indexing cycles. The stator carrier centers against mounting flanges through a 50 mm centering diameter, which helps seat the motor accurately during installation. Electrical power and feedback are routed through a connector on Side B of the housing, which helps keep cable runs organized inside narrow cabinets. Standard dynamic balancing minimizes vibration over the speed range, and motor length code C gives the active stack height for this frame.
The motor uses resolver feedback so the drive can calculate rotor angle in real time, including during rapid acceleration and deceleration. It is supplied without a blocking brake, so any holding function at standstill must come from the control system or external mechanics. The output uses a plain shaft, and there is no secondary shaft on side B. Because it comes without a shaft seal, the installation should stay clear of pressurized coolant or oil exposure. The 041 frame size and standard aluminum housing keep weight low while still providing enough surface area for convection cooling.
