MDD041C-N-100-N2K-050GB0
Bosch Rexroth Indramat's MDD041C-N-100-N2K-050GB0 belongs to the MDD Synchronous Motors series and is intended for use with digital drive controllers in automated machinery. The motor converts commanded current into accurate rotary motion, making it suitable for indexing tables, pick-and-place axes, and other high-cycle positioning tasks where rapid speed changes are common. When connected to a compatible controller, it can support coordinated axis movement in packaging, handling, and assembly equipment that must repeat the same motion profile over long production runs. Its design supports precise motion control where stable speed regulation and repeatable positioning are required.
The motor develops a continuous standstill torque of 2.05 Nm, so it can hold moderate loads at zero speed without overheating when paired with the correct drive. A rated speed of 10000 rpm supports fast positioning sequences and short cycle times in applications that require quick acceleration and deceleration. A centering diameter of 50 mm helps align the housing accurately with the machine interface. Rotor balance follows standard balancing, which reduces vibration during high-speed operation. Position data is provided by an integrated absolute encoder, allowing the controller to read rotor position immediately after power is restored without requiring a separate homing cycle.
All power and signal connections exit on side B, which helps keep cable routing away from front-mounted mechanics and can reduce congestion around the working end of the axis. The motor uses a plain shaft, so torque is transferred through an external coupling rather than a keyed connection. A built-in resolver feedback channel supports closed-loop control in demanding electrical environments, and a shaft seal protects the bearing area from dust or oil spray. The unit is supplied without a blocking brake, uses a standard housing, and connects through a coded circular connector.
