MDD065A-N-040-N2L-095GL1
The MDD065A-N-040-N2L-095GL1 synchronous servo motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. In automated machinery, this motor drives rotary axes that are controlled by digital drive controllers, converting electrical commands into mechanical rotation with high positional accuracy. It provides the torque and speed profile required for light-duty positioning stages, pick-and-place heads, or indexing tables. Its compact format makes it suitable for installations where responsive motion and accurate repeatability are more important than high continuous load capacity.
At standstill, the motor can deliver 0.8 Nm of continuous torque, so thermal limits are respected while holding or slowly moving a load. Under rated excitation, it reaches a nominal speed of 4000 rpm, matching applications that need rapid indexing without gear reduction. Accurate mounting is aided by a centering diameter of 95 mm, which helps keep the motor aligned with the machine interface. Power and feedback conductors exit on the left side, and the single multi-pin connector simplifies cable routing to the drive cabinet. The housing follows the standard enclosure style of the series. Standard dynamic balancing helps reduce vibration throughout the permitted speed range.
In holding situations, the integrated blocking brake supplies 3.0 Nm of torque, helping vertical or intermittent-motion axes remain in position when power is removed. Rotor position is reported through digital servo feedback (DSF), giving the drive high-resolution data for commutation and closed-loop control. The motor belongs to frame size 065, and the short A length code helps keep overall mass low for compact installations. Motion is transferred through a plain shaft with a shaft seal, which helps protect the output area against dust and fluid ingress. The absence of a secondary shaft end on side B also reduces the axial space needed behind the motor.
