Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MDD065A-N-040-N2L-095PA1

MDD065A-N-040-N2L-095PA1

by Bosch Rexroth Indramat
$3,074.40 - $3,074.40
$3,074.40
$3,074.40 - $3,074.40
$3,074.40
Available, Shipping Varies
The Bosch Rexroth Indramat MDD065A-N-040-N2L-095PA1 is a high-efficiency AC servomotor, designed with a built-in power connection that combines the connection cables of the temperature sensor and holding brake with the power cable. Its temperature sensor enables auto-shutdown under high-heating conditions. Equipped with a 12-pin flanged socket, it ensures accurate feedback connection and features an optical encoder system for position evaluation. The motor has a duty cycle time of at least 15 minutes, and its maximum speed depends on the DC bus voltage provided by the supply source. Note that the initial operation should only be performed by a qualified electrician. With a 1.8A continuous current rating in standstill mode and power and feedback cables of up to 75m, this motor is ideally suited for highly dynamic applications like high-speed cutting thanks to its superior accuracy and high power density.
30 Day Warranty
Technical Specifications
  • Product Model : MDD065A-N-040-N2L-095PA1
  • Manufacturer : Bosch Rexroth Indramat
  • Size Code : 065
  • Power Connection Type : Connection cables for holding brake, temperature sensor, and power
  • Temperature Control : Automatic shutting down by built-in temperature sensor
  • Type of Encoder : Optical with indirect relative position evaluation
  • Duty Cycle Time : At least 15 minutes
  • Maximum Speed : Determined by DC bus voltage
  • Mounting Procedure : Initiated only by a fully trained electrician
  • Standstill Continuous Current Rating : 1.8A
  • Motor Housing : Equipped with a RAL 9005 prime black coat
  • Feedback and Power Cables Length : Maximum 75m
  • Applicable Environmental Conditions : Can operate under poor conditions
  • Shaft Centering Diameter : 95mm
  • Balance Class : Standard R as per DIN VDE 0530, Section 14
  • Power Density : High
  • Installation : Suitable for roller feeds for highly dynamic applications
  • Performance : High accuracy in high-speed cutting applications.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204