MDD065A-N-040-N2L-095PR0
The MDD065A-N-040-N2L-095PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it provides closed-loop motion in pick-and-place axes, packaging tables, and similar automated stations. The motor follows size code 065 and the slim A length code, so it occupies little axial space while remaining compatible with the series mounting pattern. This layout suits compact machine modules where accurate starts, stops, and short indexing moves are required throughout repetitive production cycles.
At standstill, the motor can deliver 0.8 Nm of continuous torque, enough to hold fixtures or tracking wheels without overheating under rated current. Once energized, it reaches a nominal speed of 4000 rpm, allowing high cycle rates when paired with a matching drive. Position reference is maintained by a centering boss of 95 mm, a dimension that aligns the flange to gearboxes or machine plates for concentric running. Electrical and feedback plugs are oriented on the right side, and signal and power are carried through a single connector, which simplifies cable routing in narrow enclosures. The rotor is factory balanced to a standard grade to help reduce residual vibration at top speed.
Digital position data is returned through digital servo feedback (DSF), so the controller receives position information for closed-loop regulation. Mechanical holding is left to the drive because the unit is supplied without a blocking brake, which removes brake-release wiring and reduces inertial load. A fitted shaft seal helps protect the internal bearings from coolant spray or fine dust, and the output shaft is machined with a keyway for direct coupling to pulleys or pinions. The single-ended shaft on side A keeps the rear of the motor free of an extra shaft extension and supports a straightforward drive-end connection.
