MDD065A-N-060-N2L-095PL0
The MDD065A-N-060-N2L-095PL0 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital controllers, the unit supplies precise closed-loop rotation for pick-and-place, packaging, and machining axes that require accurate speed and position control. Its standard housing and single-ended shaft allow straightforward mounting to gearboxes or couplings commonly used in production equipment. The motor is intended for compact motion systems where repeatable response and dependable feedback are important during continuous machine operation.
It delivers a continuous stall torque of 0.8 Nm, so the shaft can hold that load at standstill without thermal derating. A rated speed of 6000 rpm allows high synchronous operation in cyclic tasks that require fast axis movement. Position data are returned through digital servo feedback, giving the controller direct rotor feedback for regulated motion. Mechanical alignment to the driven machine is centered by a 95 mm pilot diameter, while all power and signal conductors exit on the left side for orderly cable routing. For applications that use inverter-based braking, the motor is supplied without a blocking brake, which avoids added drag during normal running.
The motor uses length code A in a size 065 frame, giving it a compact profile suited to low-to-medium inertia loads. Standard dynamic balancing helps reduce vibration across the speed range, and the keyway shaft supports secure coupling to pulleys or pinions. Its shaft end is single-sided without a side-B extension, which keeps the drive-side connection simple. A molded connector carries both phase current and feedback lines, reducing the need for separate loose leads at installation. The presence of a shaft seal helps retain lubricant and protect the front bearing from airborne contaminants, while the standard housing protection supports installation inside general-purpose enclosures.
