MDD065A-N-060-N2L-095PL1
The MDD065A-N-060-N2L-095PL1 synchronous motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Developed for digital drive controllers, it is installed on compact axes where accurate velocity and torque regulation are required for automated assembly cells, light machine tools, and electronic packaging lines. Its compact format also suits applications that need quick response and repeatable motion in a limited installation space.
This unit reaches a nominal speed of 6000 rpm, allowing high-cycle positioning without mechanical gearing. At standstill it can deliver 0.8 Nm of continuous torque, which is available without a time limit at zero speed. An integrated blocking brake supplies 3.0 Nm of holding torque to lock the shaft during power loss or emergency stops. The centering diameter of 95 mm provides a reference surface that aligns the housing concentrically with the machine platen. Power and feedback conductors exit on the left side, which can simplify cable routing in cabinets designed for side-mounted connections. Standard balancing and a standard housing support smooth running and predictable heat dissipation for this frame size.
All electrical terminations are made through a single-shell connector, and the encoder interface uses digital servo feedback so the drive can close position and velocity loops without external sensors. The motor frame code 065 corresponds to the stator diameter, while length code A indicates the shortest rotor stack available in this size and helps keep rotor inertia low. A shaft with a keyway transmits torque into pulleys or couplings, and a fitted shaft seal helps prevent lubricant migration into the stator cavity. The shaft end is only on side A, which avoids rear overhung loads and leaves the back of the motor clear for the feedback system.
