MDD065A-N-060-N2M-095GL1
The MDD065A-N-060-N2M-095GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers on compact machine axes where coordinated motion must be controlled in a closed loop. When paired with a compatible Indramat controller, the motor converts commanded current into mechanical rotation so that positioning tables, pick-and-place heads, or small conveyors can follow programmed speed and torque profiles. This arrangement allows the drive system to regulate axis movement precisely during repeated automatic cycles.
During continuous operation at stall, the motor can maintain 0.8 Nm without overheating, and it reaches a nominal speed of 6000 rpm for high-cycle motion. A centering diameter of 95 mm helps align the flange with gearboxes or adapter plates, while standard balancing keeps vibration low across the operating speed range. Power and feedback lines exit on the left side through a keyed connector, which supports routing where cables are directed along that side of the machine. Signal quality is supported by digital servo feedback (DSF), allowing the controller to read real-time rotor position and adjust current with fine resolution. A shaft seal blocks coolant splash or oil mist, and the housing uses the standard enclosure style for this frame size.
An integrated multi-turn absolute encoder records position over multiple revolutions, so the axis position remains available after power cycles. For static load holding, a blocking brake provides 3.0 Nm of torque and is released electrically during motion. The mechanical interface uses a plain shaft, and the rear of the rotor remains closed because there is no side-B shaft extension. With a frame designation of 065 and a length code A, the motor remains short and light, which helps it fit into densely packed automation cells and other installations with limited mounting space.
