MDD065A-N-060-N2M-095GR0
The MDD065A-N-060-N2M-095GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers and provides rotary motion for closed-loop speed and position control. In automated equipment, it converts electrical input into controlled torque for packaging stations, indexing tables, and compact handling axes. It can support frequent start-stop cycles and coordinated motion where stable feedback is important to overall axis performance.
At its rated operating point, the rotor turns at 6000 rpm, which suits fast, low-inertia positioning tasks. The continuous torque available at standstill is 0.8 Nm, indicating how much torque the motor can produce without overheating during holding operation. A 95 mm centering diameter provides the pilot fit for flange alignment, and frame size 065 keeps the motor compact. The connection orientation is on the right side of the housing, which can help with cable routing where installation space is limited. Standard balancing keeps vibration within normal limits, and the connector-based power and feedback interface keeps wiring orderly.
Position data comes from the integrated multi-turn absolute encoder, and those signals are transmitted as digital servo feedback (DSF) so the drive can determine commutation angle and motor position. Because the encoder reports absolute position across multiple revolutions, the control system can retain position information after power cycling. The output uses a plain shaft in a single-ended form, which suits clamp-style couplings rather than keyed hubs. A shaft seal helps protect the bearing area from dust and splash, while the motor is supplied without a blocking brake, so holding force at standstill must come from the drive or an external mechanism. The short A-length housing and standard enclosure make the motor suitable for compact multi-axis assemblies.
