MDD065A-N-060-N2M-095PA0
The MDD065A-N-060-N2M-095PA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit converts commanded electrical power into controlled rotary motion so that tooling, conveyors, or auxiliary axes follow precise speed and position profiles in automated equipment. Its compact frame and electronic commutation make it practical for packaging lines, pick-and-place modules, and other light-duty motion tasks that need repeatable performance. This motor is well suited to compact axes that require quick starts, stable running, and accurate stopping during frequent cycling.
The motor uses a centering diameter of 95 mm, giving the mounting pilot a tight tolerance that maintains concentric alignment with the machine frame and reduces vibration. At standstill, it can deliver 0.8 Nm of continuous torque, supplying steady holding force for lightweight loads without overheating. During operation, the rotor can reach a nominal speed of 6000 rpm, which suits high-speed indexing requirements while staying within the thermal limits of the winding. Power and feedback connectors exit on side A, simplifying cable runs when the drive cabinet is located on that side of the axis. Exposure to lubricants or fine particles is reduced because the front shaft is fitted with a shaft seal, which helps prevent ingress into the bearing space.
A keyway machined into the shaft end provides positive torque transmission to pulleys or couplings without relying on friction alone. The motor has size code 065, so its housing fits compact servo stations where lower rotor inertia is preferred. Because the design is supplied without a blocking brake, any required static holding must be achieved through external clamps or controller-driven torque. Position feedback is handled by an integrated multiturn absolute encoder, and the digital servo feedback signal allows the drive to recover exact rotor angle after power cycling.
