MDD065A-N-060-N2M-095PB0
The MDD065A-N-060-N2M-095PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is designed to work with digital drive controllers in industrial automation where accurate torque and rapid speed changes are needed. The motor converts electrical input from the drive into controlled rotary motion, and its integrated multi-turn absolute encoder supplies continuous position data to the controller for closed-loop regulation. This arrangement supports repeatable motion on axes that must accelerate quickly, stop precisely, and maintain stable feedback during repeated machine cycles.
Rated for a nominal speed of 6000 rpm, the rotor can complete high-frequency cycles without mechanical gearing, which benefits fast indexing stations. At standstill, the motor can deliver 0.8 Nm of continuous torque, allowing it to hold small loads against friction or gravity while remaining within thermal limits. A centering diameter of 95 mm aligns the housing accurately on matching mounting flanges. Power and feedback lines exit on Side B, which can simplify cable routing when the motor is installed in compact machine spaces. Electrical termination is made through a single sealed connector, reducing the number of separate connection points. Rotor position is reported through digital servo feedback, permitting the drive to run precise velocity and position loops without additional sensors.
The output shaft uses a keyway so couplings can transmit torque without slipping during load changes. A durable shaft seal helps keep oil or coolant from entering the bearing area, which supports reliable operation in typical industrial environments. Mechanical balancing is standard for this housing size and is suitable for general-purpose motion duties. The motor is supplied without a blocking brake, so any holding force during power loss must be provided by external clamping or by the drive system when the application allows it.
