MDD065A-N-060-N2M-095PL0
The MDD065A-N-060-N2M-095PL0 is a compact AC servo motor manufactured by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into controlled torque and speed for compact machinery and auxiliary axes. Its compact form suits enclosed installations where cleanliness, repeatable positioning, and reliable motion are important. Typical uses include automated assembly stations, packaging equipment, and material-handling mechanisms that need accurate rotary motion in a limited space. Because the motor combines precise feedback with a compact footprint, it is suitable for axes that must start, stop, and reverse frequently without sacrificing positional consistency.
The motor reaches a nominal speed of 6000 rpm, which supports fast traverse motion while remaining synchronized with the inverter output. At standstill, it can provide 0.8 Nm of continuous torque for light holding and indexing duties. Position data comes from an integrated multi-turn absolute encoder and is carried through digital servo feedback (DSF), so the controller receives absolute shaft position over multiple revolutions. A centering shoulder diameter of 95 mm helps align the motor accurately during mounting. A shaft seal helps reduce fluid ingress around the output shaft during normal operation.
The mechanical output uses a keyway shaft, allowing torque transfer through standard keyed couplings. Power and feedback are routed through a left-side connection with a single connector interface, which keeps cable routing straightforward in tight cabinet spaces. The motor is supplied without a blocking brake, so any stationary holding force must come from the drive or an external mechanical device. The shaft end is limited to side A, which simplifies coupling layout on compact axes. This layout is useful when the motor is mounted near guards, slides, or transfer mechanisms that leave little free space around the housing.
