MDD065A-N-060-N2M-095PL1
The MDD065A-N-060-N2M-095PL1 is a compact servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it provides precise torque and velocity regulation to automated axes found in assembly lines, pick-and-place gantries, and packaging stations. An A-length housing around the 065 frame size keeps weight and installation depth low without sacrificing dynamic response, making the unit suitable for machinery that must accelerate and decelerate rapidly in confined spaces.
At standstill, the motor delivers a continuous torque of 0.8 Nm, which indicates how much load can be held without thermal overload while the shaft remains motionless. Once energized, it can reach a nominal operating speed of 6000 rpm, allowing high-speed positioning cycles when paired with a matched drive controller. Mounting is guided by a centering flange that measures 95 mm in diameter, so machine frames can be machined accurately for repeatable alignment. The power and feedback leads exit on the left side and terminate in a single coded connector, which helps keep wiring organized during installation. Standard dynamic balancing and a standard housing finish are used to reduce vibration and support consistent operation across the series.
Position accuracy and holding capability are supported by an electromechanical brake that applies 3.0 Nm of static torque whenever the drive is disabled, helping prevent axis drift on vertical loads. Motion feedback is supplied by an integrated multi-turn absolute encoder that reports position through digital servo feedback (DSF), allowing the controller to recover absolute shaft angle after power restoration. The shaft has a keyway for positive coupling, and it is protected by a shaft seal to limit lubricant leakage. A single shaft on side A, together with the A motor length code, completes the mechanical arrangement.
