MDD065B-N-040-N2L-095GL0
The MDD065B-N-040-N2L-095GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into controlled rotary motion for automated positioning, indexing, and speed-regulated processes on assembly cells, packaging stations, and material-handling axes. Its compact design supports installation in multi-axis machines where space and weight are limited, and it mates directly with Indramat power modules in closed-loop servo systems for tightly packed machine layouts.
The motor has a nominal speed of 4000 rpm, allowing rapid cycle times in pick-and-place and similar high-speed applications. It can supply a continuous stall torque of 1.5 Nm when the shaft is stationary, which is the continuous holding torque available without overheating. Position data are transmitted through digital servo feedback, allowing the drive controller to correct angular deviations quickly during closed-loop operation. Power and feedback conductors connect through a single connector in a left-side orientation, which helps keep cable routing clear of adjacent axes and cabinet doors. The motor uses size 065 laminations and length code B, which keeps the magnetic stack short and helps limit overall depth and mass in compact servo assemblies.
A centering pilot of 95 mm helps seat the frame accurately against machine flanges to reduce radial runout and improve alignment accuracy. The output end uses a plain shaft in the standard side A configuration, so the motor can be paired with shrink-fit couplings or belt pulleys. A factory-installed shaft seal helps protect the bearings from coolant splash and airborne dust during normal machine operation. The assembly is supplied without a blocking brake, which reduces rotating inertia on fast-cycling axes.
