MDD065B-N-040-N2M-095GR1
The MDD065B-N-040-N2M-095GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. This size 065 motor with length B is intended for digital drive controllers that require accurate speed and position control. When coupled directly to a machine axis, it converts command current into rotary motion for pick-and-place stations, feed drives, and other light automation tasks. Its compact format suits installations where responsive motion and repeatable positioning are important during continuous machine operation.
A continuous standstill torque of 1.5 Nm allows the motor to hold static loads while energized without excessive heat buildup. The nominal speed of 4000 rpm supports fast axis movement, and the centering diameter of 95 mm helps position the housing accurately in the mounting surface. For stopping and holding, the integrated brake provides 3.0 Nm of torque during power-off conditions. Position information is supplied through Digital servo feedback (DSF), allowing the drive to correct current quickly as load conditions change. This feedback arrangement supports smooth motion control during repeated starts, stops, and direction changes.
Power and signal wiring enter through a rear-mounted connector, and the cable connection faces the right side for straightforward routing in standard machine layouts. A shaft seal helps protect the internal bearings from coolant splash and fine contamination during normal operation. The output uses a plain shaft, which is suitable for couplings or timing pulleys that rely on accurate alignment. This layout keeps the motor body compact around the drive end and avoids unnecessary cable protrusion from the front mounting area. Standard balancing and housing design help keep vibration low so feedback signals remain stable over long operating periods.
