MDD065B-N-060-N2L-095GL0
The MDD065B-N-060-N2L-095GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it provides rotary motion for positioning tables, feeders, and light-duty spindles in automated equipment. The motor uses the standard housing style and balancing grade of the series, making it suitable for precise motion tasks that need stable running behavior. Its 065 frame size with a B-length stator keeps moving mass relatively low, which helps axes respond quickly during repeated speed changes while still supporting continuous cycling.
The motor reaches a nominal speed of 6000 rpm, allowing high surface velocities in compact mechanical stages. At standstill, it can deliver 1.5 Nm of continuous torque, so it can sustain a steady load without excessive heat buildup under proper operating conditions. Position and velocity data are returned through digital servo feedback (DSF), giving the drive controller high-resolution information for closed-loop regulation and smooth speed control. A plain shaft is used for couplings or pulleys that rely on frictional locking rather than keys. The 95 mm centering diameter helps align the motor accurately in the mounting fixture, and power and feedback lines terminate on a circular connector that keeps the interface compact and enclosed.
Cabling exits the stator on the left side, which can simplify routing when motors are installed close together on multi-axis gantries. This arrangement also keeps the cable exit predictable in dense machine layouts. The electromagnetic core uses length code B, giving a balanced relation between torque output and motor mass for small indexing duties. A fitted shaft seal helps protect the internal bearings from coolant splash and fine dust in packaging or electronics assembly equipment. The rotor is supplied without a blocking brake, so any load-holding requirement must be handled by an external clamp or by the drive's torque-holding function when the application allows it.
