MDD065B-N-060-N2L-095GL1
The MDD065B-N-060-N2L-095GL1 is a synchronous motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it delivers rotary motion for positioning axes and spindle duties in automated assembly lines, packaging systems, and material-handling equipment, where fast starts, stops, and speed changes are required. A standard housing and balanced rotor allow direct installation without additional vibration isolation, while an integral shaft seal keeps lubricants inside the bearing zone in typical factory environments.
The unit reaches a nominal speed of 6000 rpm, allowing high peripheral velocities when paired with compact gear stages or belt drives. At standstill, it can supply 1.5 Nm of continuous torque with natural convection around the B-length frame. Mounting is guided by a centering diameter of 95 mm, so alignment with machine brackets remains repeatable during installation. Power and feedback lines exit on the left side, which simplifies cable routing in cabinets that place drives to the right of the motor. A keyed connector plug carries phase conductors and resolver channels, removing the need for a fixed gland and keeping the electrical interface compact. Standard rotor balancing minimizes radial forces on the plain bearings, and the shaft end is supplied without a side-B extension to conserve envelope length.
Operational holding is handled by an integrated blocking brake rated at 3.0 Nm; it engages automatically when coil power is removed and helps prevent drift on vertical axes. Position data are returned through digital servo feedback (DSF), enabling the controller to close loops with single-turn accuracy for accurate command tracking during repetitive cycles. Motion is transferred through a plain shaft that accepts friction or shrink-fit couplings, while the motor size code 065 indicates the stator diameter used throughout this product family.
