MDD065B-N-060-N2L-095PL0
The MDD065B-N-060-N2L-095PL0 is a compact AC servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into precise rotary motion for packaging, printing, and material-handling axes. An integrated position sensor returns real-time feedback to the control loop, allowing the drive to regulate speed and position during continuous machine operation. This arrangement supports coordinated axis motion where repeatable positioning and quick response are required.
The mechanical interface uses a centering diameter of 95 mm, allowing an accurate pilot fit into gearboxes or mounting flanges. Power and feedback conductors exit on the left side through a sealed connector, which helps keep cable routing consistent on multi-axis machines. At standstill, the motor can exert 1.5 Nm of continuous torque for low-speed holding or indexing without overheating. When driven at its nominal speed of 6000 rpm, the rotor supports dynamic positioning in short-cycle applications. The feedback channel uses Digital servo feedback (DSF) to provide high-resolution position and velocity information throughout each revolution. That feedback helps the controller maintain smooth motion at low speed and during rapid changes in command.
The motor has size 065 and length code B, along with standard balancing and a standard housing for general machine use. It is supplied without a blocking brake, so external holding force is needed when power-off holding is required. A dedicated shaft seal protects the internal bearings from coolant spray or airborne oil mist. The single-ended output shaft uses a keyway for positive torque transmission to pulleys or couplings without slip. There is no second shaft end on side B, which helps reduce overall length and supports installation where space is limited.
