MDD065B-N-060-N2M-095GL0
The MDD065B-N-060-N2M-095GL0 is a brushless servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into controlled rotary motion for automated machinery. In closed-loop systems, the motor supports accurate speed and position control so CNC or PLC commands can be followed with stable response during repeated motion cycles.
This unit delivers a continuous standstill torque of 1.5 Nm, which suits low-to-medium load axes that need stable holding force without excessive thermal stress. Its rated speed reaches 6000 rpm, allowing fast positioning when it is paired with a suitable high-bandwidth drive. The centering diameter is 95 mm, so the flange fits matching machine interfaces while helping maintain shaft alignment. Cabling exits on the left side, and the power and feedback lines terminate through a sealed connector. Standard dynamic balancing helps limit vibration, while the B length code places the active stack within the 065 frame size to keep the motor compact. The housing dissipates heat through convection, and there is no secondary shaft end on side B.
The motor sends position data to the drive through Digital servo feedback (DSF), and rotor angle is measured by an integrated multi-turn absolute encoder that retains position data after power loss. A plain shaft interfaces with couplings or pulleys, and the motor has no blocking brake, so load holding must be provided externally when power is removed. A shaft seal helps limit lubricant migration into the stator chamber, and the motor uses standard bearings for typical operating conditions. These features make it suitable for light handling robots, feeders, and auxiliary spindles that require quick acceleration and precise feedback.
