MDD065B-N-060-N2M-095GL1
The MDD065B-N-060-N2M-095GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it supplies regulated torque and speed for automated axes in assembly, packaging, and handling equipment. By combining position feedback with an electromechanical brake, the motor acts as a compact drive element for industrial automation systems that require accurate motion control in a limited installation space.
This model reaches a nominal rotor speed of 6000 rpm, allowing fast indexing cycles while maintaining positional accuracy. At standstill, it can deliver 1.5 Nm of continuous torque, supporting holding and low-speed process loads without overheating. A blocking brake rated at 3.0 Nm secures vertical or suspended loads when power is removed. A centering diameter of 95 mm aligns the housing precisely to machine frames, and standard dynamic balancing helps limit vibration during high-speed operation. Electrical and feedback connectors are oriented on the left side, so cable routing can follow the surrounding machine layout. The motor uses size 065 with length code B, and the housing remains in the standard uncooled configuration to simplify mounting inside an enclosure.
An integrated multi-turn absolute encoder transmits rotor position across multiple revolutions, so the drive can retain position information after power cycles. Command and diagnostic data pass through Digital servo feedback (DSF), matching the interface used by compatible Rexroth drives. The motor is supplied with a shaft seal, which helps prevent lubricant migration or particle ingress along the output journal. A plain shaft simplifies coupling to gears, pulleys, or clamping hubs. The motor does not use a secondary shaft end on side B, which keeps the footprint shorter when mounted near guards, panels, or adjacent axes.
