MDD065B-N-060-N2M-095GR0
The MDD065B-N-060-N2M-095GR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it generates controlled torque and speed for packaging stations, pick-and-place axes, and light handling robots. The unit uses the Series 065 frame with length code B, along with a standard housing and balancing method, for smooth operation in compact multi-axis machinery. Its synchronous design also supports accurate response during repeated start-stop cycles and coordinated axis motion.
This model reaches a nominal speed of 6000 rpm, allowing fast positioning cycles when paired with a matching inverter. At standstill, it can provide a continuous torque of 1.5 Nm, allowing the axis to hold load without motion while remaining thermally stable. A centering diameter of 95 mm aligns the motor accurately on the machine plate, and the power and feedback interfaces are oriented to the right side to improve clearance near adjacent components. Position information is delivered by an integrated multi-turn absolute encoder, so the controller retains shaft angle information after power loss and can resume operation without a homing move.
The motor transmits position data through digital servo feedback, which supports precise velocity control during interpolation and electronic gearing tasks. Drive connections are established through a connector interface that supports secure cable attachment while maintaining shield continuity. The rotor uses a plain shaft, and it is fitted with a shaft seal to help limit lubricant escape and outside contamination. The design omits a blocking brake, so vertical or suspended loads must be held by external hardware or commanded torque. This output arrangement suits compact couplings where a keyed shaft is not required.
