MDD065B-N-060-N2M-095PA1
The MDD065B-N-060-N2M-095PA1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, the unit transforms commanded current into precise angular displacement for compact automation axes. Its role is to provide controllable torque and speed so that indexing tables, feeders, or small actuation modules can follow programmable motion profiles within a wider CNC or PLC-based production cell.
At the heart of its performance envelope is a nominal speed of 6000 rpm, allowing rapid cycle execution when paired with high-resolution control loops. During continuous standstill operation, the motor can deliver 1.5 Nm of torque without exceeding its thermal limits, which supports accurate holding during stationary segments of a motion sequence. A blocking brake integrated on the non-drive end supplies an additional holding capacity of 3.0 Nm to secure vertical or suspended loads during power loss. Mounting is guided by a centering diameter of 95 mm, which provides a reference surface for coaxial alignment. Power is transmitted through a keyed shaft, and the specified keyway helps prevent slip during acceleration. The design omits a shaft on side B, which reduces the overall length.
The motor uses series B body length and the compact frame code 065 in a standard enclosure without additional cooling fins. Rotational smoothness is supported by standard balancing, so adjacent drive components are exposed to less vibration at full speed. Position feedback is supplied through digital servo feedback with an integrated multi-turn absolute encoder, allowing the drive to track absolute position over multiple revolutions without homing routines. Service life is supported by a factory-installed shaft seal that blocks coolant splash and fine particles, while cable terminations are oriented toward side A through a single connector to simplify routing in tight spaces.
